Electricians
Plumbers & Gasfitters
HVAC Techs
CEC Solar Techs
Switch All Electric
Goodbye to Gas
Air to Energy 180/270L
Revolutionising Hot Water Systems
iStores premium Australian engineering captures energy in the air to generate environmentally friendly hot water to multiple taps in your home – 24×7 x 365
The iStore hot water system does more than just heat water though, it acts as an effective battery alternative, tapping into your solar PV system in order to save you money.
Advance Water Heater Technologies
Some very cool benefits & features
The iStore boasts 4 intelligent operating modes adapting to all situations, including a hybrid mode for when additional guests are staying in your home and a vacation mode for when you are away on holidays.
External wrap around heating coil provides maximum thermal energy transfer.
The iStore consumes approximately 0.5kW (1kW for 280L) of power during the air-to-energy process (average household running cycle is 3 - 4 hours = 1.5 to 2kWh total (3 - 4 kWh total for 280L)).
For the average Australian household, heating water accounts for up to 30% of the total energy usage. The iStore saves you hundreds while saving the planet!
Did you know?
The energy efficient iStore is fast becoming one of the most popular ways of heating your homes hot water. iStore’s technology has been around for decades. The refrigeration industry has been utilising this incredibly efficient form of producing heating capacity ever since the first refrigerant gas was developed way back in 1928.
Water Heating Cost Comparison
Heating hot water for your home accounts for up to a quarter of your electricity costs for the average Australian household.
The iStore reduces hot water heating consumption by two thirds from conventional electric or gas storage systems, while reducing CO2 emissions by 4 tonnes.
Installing an iStore could save you up to $950* per year on your energy bills.
Here’s how it works
iStore 180L
The iStore utilises an ingenious technology to efficiently transfer thermal energy directly from the surrounding air and into water, without dependence of the sun or fossil fuels to provide an energy source.
1. A fan draws in air, containing heat energy, across the evaporator
2. The evaporator turns the liquid refrigerant into a gas
3. The compressor pressurises the refrigerant into a hot gas
4. The hot gas inside the condenser coil heats the water inside the coil-wrapped tank
5. The refrigerant reverts back to a liquid after heating the water and continues to the evaporator for the process to start again
6. The cycle continues until the set target temperature is achieved
7. As water is used in the home, the cycle will restart once the temperature in the tank has dropped 11 degrees below the target temperature
iStore 270L
Specifications
| DIMENSIONS | |
|---|---|
| Storage Capacity | 180L |
| Height | 1956 mm |
| Diameter | 540 mm |
| Height to water inlet | 60 mm |
| Height to water outlet | 1240 mm |
| Hot Water condensation | |
| Height to PTR Valve | |
| Height to anode | 1140 mm |
| Net Weight (empty) | 93 kg |
| DIMENSIONS | |
|---|---|
| Storage Capacity | 270L |
| Height | 1955 mm |
| Diameter | 640 mm |
| Height to water inlet | 99 mm |
| Height to water outlet | 1194 mm |
| Hot Water condensation | |
| Height to PTR Valve | |
| Height to anode | 1094 mm |
| Net Weight (empty) | 135 kg |
| STC Values by Zone (180L) | |||||
|---|---|---|---|---|---|
| ZONE | 3 | ||||
| STC's | 27 | ||||
| Energy Savings (%) | 72 | ||||
| STC Values by Zone (270L) | |||||
|---|---|---|---|---|---|
| ZONE | 3 | ||||
| STC's | 24 | ||||
| WARRANTY INFORMATION (General) | |
|---|---|
| Cylinder | 5 years |
| Refrigeration & electrical | 2 years |
| All other components | 1 year |
Let us assist you to choose the best Hot Water System for your family.
ABN: 94 662 582 256
Copyright © 2023 En3rgy Solutions Privacy Policy
