RECLAIM ENERGY CO2 Heat Pump
THE FUTURE OF HOT WATER IS HERE
Air-Source CO2 Heat Pump Hot Water System
The Reclaim Energy air to water heat pump hot water is a very efficient device that uses heat in the ambient air for hot water production. Its heat energy output is about three to five times as high as the electricity input required to run it.
The Reclaim Energy CO2 air source heat pump, produces domestic hot water at 63°C without requiring an electrical backup and “even at an outside temperature of -10°C”.
An air to water heat pump is a very efficient device that uses heat in the ambient air for hot water production. Its heat energy output is about three to five times as high as the electricity input required to run it. The Reclaim Energy CO2 air source heat pump, produces domestic hot water at 63°C without requiring an electrical backup.
Reclaim Energy is committed to energy efficiency and developing systems that help people live more sustainable lives. Their CO2 Heat Pump Hot Water System is a result of this commitment. An innovative, intelligent and customised environmentally sustainable hot water solution that helps people save money and achieve a more sustainable lifestyle.
The Perfect Hot Water Solution
Custom Designed for Australian Conditions
Enjoy massive long-term energy savings. With Reclaim Energy Heat Pump Hot Water you can save up to 80% off your hot water bill. Why? Because the hot water system uses less energy and has a higher thermal output than electric or gas water heaters. The top-down Heat Pump return heating design ensures quick water recovery. The system is whisper quiet and up to 200% more environmentally friendly than systems that use standard refrigerants.
The Reclaim Energy CO2 Heat Pump is one of the first truly smart hot water systems available on the market. In essence, it works like a 3-4 kWh battery for your home. Its controller has been designed to be complimentary to a households PV solar system allowing householders to take advantage of any surplus energy they are creating, before it gets exported back to the grid. The system qualifies for all the Solar Hot Water rebates (STC’s, REPS).
Interactive control and monitoring, with 5 presets, allows households to take control over their energy generation and management at the touch of a button. The hot water system is designed to allow householders to manage their energy consumption in line with their needs whether that be by running the system when excess energy is being produced (for those people with Solar PV) or on a continuous or Off-peak mode of operation. Single shot boost option guarantees that you will never be without hot water.
Top-down Heat Pump return heating for rapid hot water recovery. Average annual energy saving of up to 80%. Has the ability to heat hot water from as little as $1 per day. Average daily consumption of 3 kWh per day. Designed to use excess One-shot boost function for worry free hot water supply. Optimised for time of use tariffs.
Air Heat Pumps extract energy from the surrounding air
How does it work?
The Reclaim Energy CO2 Heat Pump Hot Water System consists of a heat pump (compressor) and a storage tank (stainless steel or glass lined). The system’s heat exchange collects heat from the air surrounding the unit to use as energy to heat up a pressurised refrigerant, which is ozone friendly CO2. The unit can supply in excess of five units of heat energy from ambient air for every unit of electricity it consumes, meaning the cost of energy used to produce hot water is minimised. The CO2 Heat Pump has excellent cold weather performance characteristics, meaning there is no need for a boosting element to supplement heating for the unit.
Combining the system with your PV system (Solar Power System) only enhances the reduction in energy consumption and costs. The Reclaim Energy CO2 Heat Pump with an average of 3 kWh electric input for a 315 L hot water delivery (i.e. as opposed to 15 kWh electric input requirement of electric element tanks for 315 L hot water delivery) is like having a virtual battery for your home. It is designed to consume excess PV during peak sun hours to maximise savings and take advantage of the energy already created rather than exporting it back to the grid.
Rebates and financial incentives are offered Australia wide at a federal and state level for using hot water heaters powered by renewable energy. Additional rebates may be available from state governments or local councils.
HURRY! Secure a massive up to $2,020* in Government Incentives & Financial Subsidies
Specifications
Storage Capacity | 160L / 250L | Max. Temperature Setting | 63 C |
---|---|
Power Input | 0.87 kW |
Heating Output | 5.24 kW |
Noise Rating | 37 db |
Running Current | 10A(Max) |
Power Supply | 240V/50Hz |
Rain Resistance | IP4 | Water Inlet/Outlet Size | 12.7mm (1/2″) |
---|---|
Refrigerant | CO2 (R744) |
Operating Temperature Range | -10C – 43C |
PTVR Pressure | 850kPa |
Tank Location | Indoor / Outdoor |
Tank Weight (Empty) | 58kg (160L) / 72kg(250L) |
Let us assist you to choose the best Hot Water System for your family.
ABN: 50 008 125 451
Copyright © 2023 En3rgy Solutions Privacy Policy